英汉齿轮专业词汇对照表

分享到：

　　 Abrasive wear || M磨粒磨损
Accuracy of bevel and hypoid gears || Z锥齿轮和准双曲面齿轮 精度
Accuracy of cyllindrical worm and wormwheel || Y圆柱蜗杆、蜗轮精度
Accuracy of fine-pitch bevel gears || XMSZ小模数锥齿轮精度
Accuracy of fine-pitch cylindrcal worm and wormwheel || XMSY小模数圆柱蜗杆、蜗轮精度
Accuracy of involute cylindrcal gears || J渐开线圆柱齿轮精度
Accuracy of rack || C齿条精度
Active flank || Y有效齿面
Addendum || C齿顶高
Addendum angle || C齿顶角
Addendum coefficient || C齿顶高系数
Addendum modification || J径向变位(变位)
Addendum modification coefficient || J径向变位系数(变位系数)
Addendum modification(for external gears ):Dedendum modification (for internal gears ) || J径向变位量(变位量)
Addendum modification of wormwheel || W蜗轮齿廓变位量
Addendum modification on gears || C齿轮的变位
Archimiedes spiral || A阿基米得螺线
Addendum || C齿顶高
Addendum flank || S上齿面
Addendum modification coefficient of wormwheel || W蜗轮变位系数
Angular dimensions || J角参数
Angular pitch || C齿距角
Annulus gear || N内齿圈
Apex crlssing point and locating face || D顶点，交点和定位面
Apex to crown || G冠顶距
"Arc-contact worm, Hollow flank worm, ZC-worm " || Y圆弧圆柱蜗杆（ZC蜗杆)
Associsted gear failure || Q其它损伤
Axial diametral pitch || Z轴向径节
Axial dimensions || Z轴向参数
"Axial modification,Longitudinal correction" || C齿向修形
Axial module || Z轴向模数
Axial pitch || Z轴向齿距
Axial plane || Z轴平面
Axial plane of worm || W 蜗杆轴平面
Axial plane of worm || W 蜗轮轴平面
Axial profile || Z轴向齿廓
Axial profile angle of worm || W蜗杆轴向齿形角
Axial space width || Z轴向齿槽宽
Axial tooth profile || Z轴向齿廓
Axial tooth thickness || Z轴向齿厚
Back cone || B背锥面（背锥）
Back cone angle || B背锥角
Back cone distance || B背锥距
Back cone tooth profile || B背脊齿廓
Backlash || C 侧隙
Ball oscillating tooth || G滚珠活齿
Base circle || G基圆
Base circle of involute helicoid worm || J渐开线蜗杆基圆
Base clylinder || J基圆柱面
Base cylinder of involute helicoid worm || J渐开线蜗杆基圆柱面
Base diameter || J基圆直径
Base diameter of involute helicoid worm || J渐开线蜗杆基圆直径
Base helix || J基圆螺旋线
Base helix angle || J基圆螺旋角
Base lea|<< << <